Station On/Off - Samsung DCS-816 Programming Manual

SAMSUNG
DCS-816
MMC: 110
DESCRIPTION:
Allows the system administrator to set any of the keyset features listed below.
0
1
2
3
4
5
6
7
PROGRAM KEYS
UP & DOWN
KEYPAD
SOFT KEYS
SPK
HOLD
ANS/RLS
ACTION
1. Press TRSF 110
2. Dial station number (e.g., 205)
AUTO HOLD
AUTO TIMER
HEADSET USE
HOT KEYPAD
KEY TONE
PAGE REJOIN
RING PREF.
CALL COST
Display shows
OR
Press UP or DOWN to select station and press
RIGHT soft key to move cursor
OR
Press ANS/RLS for ALL

STATION ON/OFF

Automatically places an existing C.O. call on hold if a
CALL button, trunk key or trunk route key is pressed
during that call.
Automatically starts the stopwatch timer during a C.O.
call.
When ON, this feature disables the hookswitch allowing
a headset user to answer all calls by pressing the
ANS/RLS button.
When ON, this feature allows the user to dial directory
numbers without having to first lift the handset or press
the SPK button.
Allows the user to hear a slight tone when pressing
buttons on keyset.
Allows the user to hear the latter part of page
announcements if keyset becomes free during a page.
When OFF, requires the user to press the fast flashing
button to answer a ringing call after lifting the handset.
If enabled (ON), LCD shows real–time call cost based
on Metering Pulses arrived.
Used to scroll through options
Used to enter selections
Move cursor left and right
Used to store data and advance to next MMC
Used to clear previous entry
Used to select ALL
MMC 110 (Page 1 of 2)
Programming
February, 1999
DISPLAY
[201] STN ON/OFF
AUTO HOLD :OFF
[205] STN ON/OFF
AUTO HOLD :OFF
[ALL] STN ON/OFF
AUTO HOLD :?