Samsung DCS-816 Programming Manual page 189

SAMSUNG
DCS-816
MMC: 718
DESCRIPTION:
This MMC is used for handling CID received from ISDN line for Memory or CID
Review dial use.
In some situation, crude CLI from network is not the type of later dialing purpose.
There is a content which identifying what type of zonal call is being progressed, i.e.,
Type of Number specified in ETSI.
According to Specification, Types of numbers could be:
COUNTRY
AREA
PROGRAM KEYS
UP & DOWN
KEYPAD
SOFT KEYS
SPK
HOLD
ANS/RLS
ACTION
1. Press TRSF 718
Display shows
2. Enter 0 for COUNTRY or 1 for AREA
OR
Press UP or DOWN keys to make selection and
press RIGHT soft key to move cursor
3. Enter area code (max. 4 digits) via dial
keypad(e.g.,2) and
Press RIGHT soft key to move cursor back to step
2.
4. Press TRSF to store and exit
OR
Press SPK to store and advance to next MMC
DEFAULT DATA: COUNTRY:
RELATED ITEMS:
Call from International.
Call from Intra/Inter Area in a country.
Used to scroll through options
Used to enter selections
Move cursor left and right
Used to store data and advance to next MMC
Used to clear previous entry
Used to select ALL
International call code for selected country at MMC 812
CID REVIEW SAVE/DIAL
CID ABANDONED LIST
MMC 718 (Page 1 of 1)
MY AREA CODE
DISPLAY
MY AREA CODE
AREA
MY AREA CODE
COUNTRY :
MY AREA CODE
AREA
Programming
February, 1999
:
:2