System Access Codes - Samsung DCS-816 Programming Manual

SAMSUNG
DCS-816
The DCS-816 system has the following preset (default) feature access codes. These
codes can be used if a key is not available for the feature you want to use. Standard
telephone users must always dial these codes.
9 First trunk group
10 + xxx Retrieve parked calls
11 Put calls on and take calls off hold
12 +xxx Retrieve calls on hold at another
station
13 Door lock release
16 + xxx Make speed dial calls
17 Save number and redial it
18 Recall dial tone for new call
19 Last number redial
2xx Extension numbers
400 Cancel Do not Disturb
401 Set Do Not Disturb
41 Set Message No Ring
42 + xxx Cancel message
43 Set/return messages
44 Busy station/line callback
45 Busy station camp-on
46 Set up a conference
47 Enter account code
48 Set programmed station message
49 Send flash to outside line
500 Operator group
5xx Station hunt group
53+grp+0 Out of group
53+grp+1 In group
54+zone Meet Me Page
55 + 0 Page all internal zones
55 + 1 Page internal zone 1
55 + 2 Page internal zone 2
System Administration and Special Features Guide

SYSTEM ACCESS CODES

3 - 17
55 + 3 Page internal zone 3
55 + 4 Page internal zone 4
55 + 5 Page external zone 1
55 + Q
All Page
56 Meet Me Answer
58 DISA alarm clear
59 Walking class of service
600 Cancel all call forwarding
601 + xxx Set Forward All Calls
602 + xxx Set Forward Busy
603 + xxx Set Forward No Ans
604 + xxx Set Fwd Busy/No Ans
605 + xxx Set Fwd Follow me
65 Directed call pickup
66 Group call pickup
67 Universal Answer
7xx Individual line numbers
78xx ISDN SO numbers
8x Trunk groups
0 Call attendant or system operator
February, 1999