Samsung DCS-816 Programming Manual page 154

SAMSUNG
DCS-816
MMC: 606
DESCRIPTION:
Provides a means of adding or deleting speed dial blocks to the system or an
individual keyset. With the ability to delete a block or blocks of speed dial, it will
not be necessary to waste these on such items as voice mail, DPIMs or stations
that do not require the ability to use speed dial.
The Free List shows how many bins are left to be assigned. One block has ten
(10) entries. DCS-816 has a maximum of 500 entries in a system: 300 for
System Speed while the rest can be allocated as personal numbers with a
maximum of 50 per–station. For example, if the System Speed block has been
assigned as 100 entries then 100 entries can be shared between the extensions.
PROGRAM KEYS
UP & DOWN
KEYPAD
SOFT KEYS
SPEAKER
HOLD
TRSF
ACTION
1. Press TRSF 606
2. Press RIGHT soft key to advance cursor to next
3. Make a selection of SYSTEM or EXT using UP
4. Enter desired EXT number via dial keypad (e.g.,
5. Enter in valid number for bins (e.g., 0–5 for EXT
Display shows
line
or DOWN key and press RIGHT soft key to
advance cursor
205)
OR
Press UP or DOWN key to make selection and
press RIGHT soft key to advance cursor
or 00–50 for SYSTEM)
OR
Press UP or DOWN key to make selection
OR
Press HOLD key to delete bin(s)
ASSIGN SPEED BLOCK
Used to scroll through options
Used to enter selections
Move cursor left and right
Used to store data and advance to next MMC
Used to clear entry
To exit programming
MMC 606 (Page 1 of 2)
Programming
February, 1999
DISPLAY
FREE LIST:30
SYSTEM:20
FREE LIST:30
SYSTEM:20
FREE LIST:30
EXT201:1
FREE LIST:30
EXT205:1
BUSY LIST:30
EXT205:5