Samsung DCS-816 Programming Manual page 236

SAMSUNG
DCS-816
MMC: 810
DESCRIPTION:
Used only in the event that all data processing is needed to be stopped in either
a single slot or the entire system.
PROGRAM KEYS
UP & DOWN
KEYPAD
SOFT KEYS
SPK
ANS/RLS
ACTION
1. Press TRSF 810
Display shows
2. Enter slot number via dial keypad (e.g. 1)
OR
Press UP or DOWN key to make selection and
press RIGHT soft key to advance cursor
OR
Press ANS/RLS to select all slots
3. Enter in 1 for HALT or 0 to PROC
OR
Press UP or DOWN key to make selection and
press RIGHT soft key to enter data and return to
step 2
4. Press TRSF to store and exit
OR
Press SPK to store and advance to next MMC
DEFAULT DATA: None
RELATED ITEMS: None
HALT PROCESSING
Used to scroll through options
Used to enter selections
Move cursor left and right
Used to store data and advance to next MMC
Used to select ALL
MMC 810 (Page 1 of 1)
Programming
February, 1999
DISPLAY
HALT/PROCESSING
SLOT NO:ALL→PROC
HALT/PROCESSING
SLOT NO:1 →PROC
HALT/PROCESSING
SLOT NO:ALL→PROC
HALT/PROCESSING
SLOT NO:1 →HALT