Samsung DCS-816 Programming Manual page 123

SAMSUNG
DCS-816
MMC: 500
DESCRIPTION:
sed to set the values of the system counters. The counters are listed below with a
U
brief description of each.
0 ALARM REM. CNTER
1 AUTO RDL COUNTER
2 DISA CALL CNTER
3 DISA LOCK CNTER
4 NEW CALL COUNTER Number of times the system will allow a user to signal
5 UCD VISUAL ALARM
6 UCD AUDIO ALARM
7 UCD CS LEVEL 1
8 UCD CS LEVEL 2
PROGRAM KEYS
UP & DOWN
KEYPAD
SOFT KEYS
SPK
HOLD
ANS/RLS
SYSTEM–WIDE COUNTERS
The number of times that an alarm reminder will ring a
station before cancelling. RANGE = 1–99.
The number of times the system will redial an outside
number after the auto redial feature has been
activated. RANGE = 1–15.
Sets the maximum number of intercom calls that can
be made after accessing a DISA line. RANGE = 1–99.
Number of attempts the system will allow to incorrectly
access a DISA line before locking out the DISA line.
RANGE = 1–99.
New Call on a C.O. line during one call. RANGE =
1–99.
Used to set the Visual alarm threshold. It is triggered
when the number of calls waiting to be answered in the
UCD group reaches this value. RANGE = 0–25.
Used to set the Audio alarm threshold. It is triggered
when the number of calls waiting to be answered in the
UCD group reaches this value. RANGE = 0–25.
Provides call wait indication level 1 if number of calls
waiting to be answered in UCD group reaches this
value. RANGE = 0–25.
Provides call wait indication level 2 if number of calls
waiting to be answered in UCD group reaches this
value. RANGE = 0–25.
Used to scroll through options
Used to enter selections
Move cursor left and right
Used to store data and advance to next MMC
Used to clear previous entry
Used to select ALL
MMC 500 (Page 1 of 2)
Programming
February, 1999