Samsung DCS-816 Programming Manual page 225

SAMSUNG
DCS-816
MMC: 801
DESCRIPTION:
Used to change the passcode which allows access to MMC 800 (Enable
Technician Program) from its current value.
NOTE: The passcode is four characters long. Each character can be digits 0–9.
The current or "old" passcode is required for this MMC.
PROGRAM KEYS
KEYPAD
SPK
ACTION
1. Press TRSF 801
2. Enter new passcode
3. Enter new passcode again
4. If passcode is correct, press RIGHT soft key to
continue and enter desired MMC
If passcode is incorrect
System returns to step 2
5. Press TRSF to store and exit
OR
Press SPK to advance to MMC
DEFAULT DATA: Default passcode = 4321
RELATED ITEMS: MMC 800 Enable Technician Program
CHANGE TECHNICIAN PASSCODE
Used to enter passcodes
Save data and advance to next MMC
MMC 801 (Page 1 of 1)
Programming
February, 1999
DISPLAY
TECH. PASSCODE
NEW CODE:_
TECH. PASSCODE
NEW CODE:QQQQ
TECH. PASSCODE
VERIFY : :QQQQ
TECH. PASSCODE
VERIFY :SUCCESS
TECH. PASSCODE
VERIFY :FAILURE
TECH. PASSCODE
NEW CODE: :QQQQ