Samsung DCS-816 Programming Manual page 93

SAMSUNG
DCS-816
MMC: 401
DESCRIPTION:
Used to select the mode of the C.O. line. If the PBX mode is chosen, this allows
PBX access codes to be recognised, thus allowing more complete toll restriction
(call barring). This mode is assigned on a per–trunk basis. If a trunk requires the
use of the RECALL key, it must be set to PBX mode.
PROGRAM KEYS
UP & DOWN
KEYPAD
SOFT KEYS
SPK
HOLD
ANS/RLS
ACTION
1.
2.
3.
4.
DEFAULT DATA: All Trunks C.O. Line
RELATED ITEMS: None
Used to scroll through options
Used to enter selections
Move cursor left and right
Used to store data and advance to next MMC
Used to clear previous entry
Used to select ALL
Press TRSF 401
Display shows
Dial trunk number (e.g., 704)
OR
Use UP or DOWN to scroll through trunk
numbers and press RIGHT soft key to move
cursor
OR
Press ANS/RLS to select ALL
Dial 1 for PBX or 0 for C.O.
OR
Use UP or DOWN to scroll through options
Press RIGHT soft key to return to step 2
Press TRSF to store and exit
OR
Press SPK to store and advance to next
MMC
C.O./PBX LINE
MMC 401 (Page 1 of 1)
Programming
February, 1999
DISPLAY
[701] PBX LINE
CO LINE
[704] PBX LINE
CO LINE
[ALL] PBX LINE
?
[704] PBX LINE
PBX LINE