Samsung DCS-816 Programming Manual page 120

SAMSUNG
DCS-816
MMC: 424
DESCRIPTION:
Generates a table by which an ISDN terminal number is mapped onto a BRI
STATION port.
For a detailed description and other MMC–related procedures, refer to the
section BRI Related MMC Procedure in this manual.
NOTE
For each BRI access, two adjacent ports are assigned. You need only map a number onto one of
the two ports. You can map only one port to each number. This means you can't use the same
number in more than one BRI access. However, more than one number can be mapped onto a port
and used in a BRI access.
PROGRAM KEYS
UP & DOWN
KEYPAD
SOFT KEYS
SPK
HOLD
ACTION
1. Press TRSF 424
2. Dial an ISDN terminal number (e.g. 7803)
3. Dial an ISDN station number (e.g. 703)
4. Press TRSF to store and exit
DEFAULT DATA: None
RELATED ITEMS: MMC 419 BRI Option
Used to scroll through options
Used to enter selections
Move cursor left and right
Used to store data and advance to next MMC
Used to clear previous entry
Display shows
OR
Press UP or DOWN key to select the number
and press RIGHT soft key to move cursor
OR
Press UP or DOWN key to select the number
and press RIGHT soft key to move cursor
OR
Press SPK to store and advance to next MMC
MMC 423 S/T Mode
S0 MAPPING
MMC 424 (Page 1 of 1 )
Programming
February, 1999
DISPLAY
[7801]S0 MAPPING
NONE
[7803]S0 MAPPING
NONE
[7803]S0 MAPPING
703