Gnss Positioning - Huawei MU609 Application Manual

HUAWEI MU609 HSPA LGA Module
Application Guide
OK
^DATASETRULT: 50
AT^WPDST=1
OK
AT^WPDFR=65535,1
OK
AT^WPQOS=255,500
OK
AT^WPDGP
OK
^POSITION:
113.94026d,22.53206d,270m
^POSEND: -1,9
Note:

12.5 GNSS Positioning

The GNSS positioning uses both the GPS and GLONASS satellites for positioning.
Command
AT^WGNSS=1
OK
Issue 02 (2013-09-18)
XTRA date must be injected before XTRA data is injected.
Huawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd.
Notify XTRA Data injected Result.
Set the session type to tracking and positioning.
Set the number of positioning times and the
interval between each positioning for the tracking
and positioning.
Set the positioning service quality. The first
parameter indicates the response time,and the
second indicates the horizontal accuracy
threshold.
Start positioning.
Present the positioning result.
The first value indicates positioning end
reason,and the second indicates the left
positioning times.
Description
Set GNSS as the positioning system to use both
the GPS and GLONASS satellites for positioning.
To switch from one positioning system to another,
the module must restart. To switch the module to
use GPS satellites only, run AT^WGNSS=0 and
restart the module.
GPS Application Scenarios
98