Initialization Application Scenarios; Startup Indication ^Sysstart; Reference Process; Troubleshooting - Huawei MU609 Application Manual

HUAWEI MU609 HSPA LGA Module
Application Guide
2

2.1 Startup Indication ^SYSSTART

2.1.1 Reference Process

Command
^SYSSTART
Notes:

2.1.2 Troubleshooting

Scenario
The module presents
^SYSSTART during startup.
After that, the module
presents ^SYSSTART again.
Issue 02 (2013-09-18)

Initialization Application Scenarios

 ^SYSSTART is presented only when a module is starting and will not be presented after a
module has started.
 ^SYSSTART is presented only after the radio frequency (RF) initialization completes and
will not be presented in offline mode.
Huawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd.
Description
A module, without solicitation, presents ^SYSSTART to
its host to indicate that the module is starting.
Indicate that a module is starting.
Possible Error
Information
Indicate that the
module has been
reset.
Initialization Application Scenarios
Solution
If ^SYSSTART is presented
repeatedly, send the module
to the specified repair center.
19