Setting Fota Mode; Reference Process; Troubleshooting - Huawei MU609 Application Manual

HUAWEI MU609 HSPA LGA Module
Application Guide

16.2 Setting FOTA Mode

16.2.1 Reference Process

Command
AT^FOTAMODE=?
^FOTAMODE: (0-1),(0-1),(0-1),(0-
1),(1-65535)
OK
AT^FOTAMODE?
^FOTAMODE: 0,0,0,1,7
OK
AT^FOTAMODE=1,1,1,1,15
OK
Notes:

16.2.2 Troubleshooting

Scenario
An error message is
returned.
Issue 02 (2013-09-18)
 Parameter settings are all saved upon power-off.
 All parameters will be restored to their default values after the upgrade.
Huawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd.
Description
Check the parameter range supported by
the command.
Query the current settings.
Return the current FOTA mode: manual
query, manual download, manual upgrade,
and resumable data transfer enabled
The value 7 indicates that the query cycle is
seven days, which is meaningless when
manual query is used.
Configure FOTA mode as auto query, auto
download, auto upgrade, and resumable
data transfer enabled. And the auto query
cycle is set to 15 days.
Possible Error
Information
+CME ERROR: Error
command parameters
FOTA Application Scenarios
Solution
The parameter is incorrectly
set. For details, see the latest
version of MU609 V100R002
in HUAWEI MU609 HSPA
LGA Module AT Command
Interface Specification.
119