Stk Application Scenarios; Unsolicited Report Of Stk Proactive Commands; Reference Process - Huawei MU609 Application Manual

HUAWEI MU609 HSPA LGA Module
Application Guide

14.1 Unsolicited Report of STK Proactive Commands

14.1.1 Reference Process

Command
AT^STSF=1,2
OK
+CUSATP: "
D081A2810301250082028182850F8000550053
0049004D53615E9475288F0A11807CBE54C16
3A883508F0A318059296C14988462A58F0A32
80822A73ED67E58BE28F0A338051FA884C63
0753578F0A34804F53575B5FEB8BAF8F0C51
8065B095FB65E9665A62A58F0A5280624B673
A97F34E508F0A5380624B673A96058BFB8F0
A5480624B673A90AE7BB18F0A558077ED4FE
152A974068F0C5680624B673A84254E1A5385
"
AT+CUSATT="810301250082028281830100"
OK
Issue 02 (2013-09-18)
14

STK Application Scenarios

Huawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd.
STK Application Scenarios
Description
Activate the STK interface
function, set the STK interface
to 3GPP standard mode.
Content of the SET UP MENU
proactive command. The string
should be interpreted
according to the ETSI protocol
TS102223. The protocol states
that the command type is
determined by the 7th byte if
the string length is greater than
127 bytes, and the 6th byte if
the string length is 127 bytes
or less. In the provided
example, the 7th byte is 25,
which indicates SET UP
MENU.
The CAT client uses the AT
command to respond to the
proactive command. This
string means "command
performed successfully".
107