Ecm Application Scenarios; Ecm Dialing; Reference Process - Huawei MU609 Application Manual

HUAWEI MU609 HSPA LGA Module
Application Guide

17.1 ECM Dialing

17.1.1 Reference Process

Command
AT^NDISDUP=?
^NDISDUP: (1-16),(0-1)
OK
AT^NDISDUP=1,1,"1234"
OK
^NDISSTAT: 1,,,IPV4
AT^NDISDUP=
1,1,"4321","huawei","huawei",1
OK
^NDISSTAT: 1,,,IPV4
The process of obtaining the IP address:
1.
2.
3.
Issue 02 (2013-09-18)
17

ECM Application Scenarios

After the dial-up is successful, the module will establish the DHCP service
automatically.
The PC driver will get the dial-up state and send net_ready state to the network
manage.
The network manager sends the DHCP service discover.
Huawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd.
ECM Application Scenarios
Description
Check the parameter range supported by
the command.
Set up a dial-up connection using the
APN provided by the network server.
The command is successfully executed.
Report the dial-up connection state.
Set up a dial-up connection using the
account, password, and authentication
mode provided by the network server.
The command is successfully executed.
Report the dial-up connection state.
131