Software Procedure; Advantages - Huawei MU609 Application Manual

HUAWEI MU609 HSPA LGA Module
Application Guide

10.5.2 Software Procedure

Command
AT^WAKEUPCFG=?
^WAKEUPCFG: (0-1),(0-3),(0-15)
OK
AT^WAKEUPCFG=1,1,14
OK
AT^CURC=?
^CURC: (0-2)
OK
AT^CURC=2,820,1FFFFFFFFFFFFFFF
OK

10.5.3 Advantages

A solution is provided for systems not supporting USB remote resume.
With software configuration, while the system requirements (calling and text
messages) are met, the number of times the host is woken up by unsolicited
messages, and consequently the power consumption, are reduced.
Issue 02 (2013-09-18)
Sleeping and Waking Up Application Scenarios
Huawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd.
Description
Query the range of
parameter
WAKEUPCFG.
Configure the module to make sure
that text messages, data, and
unsolicited messages can remotely
wake up the host using the
WAKEUP_OUT pin.
Query the parameter range of CURC.
The host wakes up from sleep if
either of the following occurs: The
SIM card state changes, such as the
SIM card is removed (^SIMST); the
number of text messages exceeds
the limit ( ^SMMEMFULL ). Other
unsolicited messages are saved in
the cache when the host is in sleep
mode, and reported to the host when
it wakes up.
When the host is awake, unsolicited
messages are reported to the host.
86