Table Of Contents - Canon FINISHER-C1 Service Manual

CHAPTER 1 GENERAL DESCRIPTION
I. FEATURES ..................................1-1
II. SPECIFICATIONS .......................1-2
A. Specifications ...........................1-2
B. Cross Section ...........................1-7
III. USING THE MACHINE ................1-9
A. Removing Paper Jams from
the Finisher Unit .......................1-9
B. Supplying the Finisher Unit
with Staples ........................... 1-10
C. Removing Staple Jams from
the Finisher Unit .................... 1-11
D. Removing Paper Jams from
the Saddle Sticher Unit .......... 1-13
CHAPTER 2 FINISHER UNIT BASIC OPERATION
I. BASIC OPERATION ....................2-1
A. Outline ......................................2-1
B. Outline of Electrical
Circuitry ....................................2-2
C. Inputs to and Outputs
from the Finisher
Controller PCB ..........................2-3
II. FEED/DRIVE SYSTEM................2-9
A. Outline ......................................2-9
B. Types of Delivery Paths ......... 2-13
C. Feeding and Delivering.......... 2-16
COPYRIGHT © 1998 CANON INC.
CONTENTS
FINISHER-C1/SADDLE FINISHER-C2 REV. 0 DEC. 1998 PRINTED IN JAPAN (IMPRIME AU JAPON)
E. Supplying the Saddle Stitcher
Unit with Staples .................... 1-14
F. Removing Staple Jams from
the Saddle Stitcher Unit ......... 1-15
G. Removing Paper Jams from the
Interrupt Tray .......................... 1-17
IV. MAINTENANCE BY THE USER 1-18
A. Maintenance by the User ...... 1-18
D. Job Offset .............................. 2-19
E. Stapling Operation ................. 2-22
F. Stapler Unit ............................ 2-28
G. Tray Operation ....................... 2-35
H. Detecting the Height of the Stack
on the Tray ............................. 2-37
I. Shutter Operation .................. 2-39
J. Buffer Path Operation ............ 2-43
K. Interrupt Tray Delivery ............ 2-47
L. Detecting Jams ...................... 2-49
III. POWER SUPPLY SYSTEM ...... 2-55
iii