Canon FINISHER-C1 Service Manual page 51

2. Flow of Job Offset Operations
1) The swing guide moves up and, at the same time, the feed belts move the sheet to the stapling
tray.
2) The alignment plate shifts the sheet to the front.
COPYRIGHT © 1998 CANON INC. FINISHER-C1/SADDLE FINISHER-C2 REV. 0 DEC. 1998 PRINTED IN JAPAN (IMPRIME AU JAPON)
CHAPTER 2 FINISHER UNIT BASIC OPERATION
Offset sheet
Tray 1/2/3
Delivery roller
Figure 2-221
Existing stack
Figure 2-222
Swing guide
Stapling tray
Alignment plate
Offset sheet
Feed roller 2
Feed belts
Stopper
2-21