Supplying The Saddle Stitcher Unit With Staples - Canon FINISHER-C1 Service Manual

CHAPTER 1 GENERAL DESCRIPTION
6) Open the inlet cover, and remove the jam.
Figure 1-328
7) Close the front lower cover.
Figure 1-329
8) Connect the finisher unit.
9) Operate as instructed on the display.
COPYRIGHT © 1998 CANON INC.
1-14
E.
If the copier indicates the saddle stitcher
unit staple supply message, perform the follow-
ing to supply it with staples.
1) Open the front lower cover.
2) Slide out the stitcher unit.
3) Pull the stitcher unit to the front once, and
then shift it up.
FINISHER-C1/SADDLE FINISHER-C2 REV. 0 DEC. 1998 PRINTED IN JAPAN (IMPRIME AU JAPON)
Supplying the Saddle
Stitcher Unit with Staples
(Saddle Finisher-C2)
Figure 1-330
Figure 1-331
Figure 1-332