Canon FINISHER-C1 Service Manual page 160

CHAPTER 4 MECHANICAL CONSTRUCTION
4) Secure the paper retaining plate in place on
the paper retaining plate fixing plate with
three screws.
5) Remove the two screws used to serve as a
reference.
6) Mount the parts removed for mounting the
paper retaining plate.
4.1 Reference
At times, the paper retaining plate and its
fixing plate can become separate when they are
led through the gap. Study the following to fa-
cilitate the work.
4.1.1 Using Double-Sided Adhesive Tape
Keep the paper retaining plate and its fixing
plate together by means of double-sided ad-
hesive tape [1]. Then, perform the work
starting with step [2]) under 4. "Adjusting
the Position of the Paper Retaining Plate."
4-30 COPYRIGHT © 1998 CANON INC. FINISHER-C1/SADDLE FINISHER-C2 REV. 0 DEC. 1998 PRINTED IN JAPAN (IMPRIME AU JAPON)
[1]
Figure 4-129B