Canon FINISHER-C1 Service Manual page 81

4. Buffer Inlet Sensor Stationary Jam (22H)
The copier does not move past the buffer inlet sensor when an equivalent of twice the feeding
length of the sheet has been fed after the sensor turned on.
Jam check
Buffer inlet sensor
(PI17)
Feed motor (M1)
5. Buffer Path Paper Sensor Delay Jam (13H)
The buffer path paper sensor does not detect paper when an equivalent of 400 mm has been fed
after the buffer inlet sensor turned on.
Jam check
Buffer inlet sensor
(PI3)
Buffer path paper
sensor (PI14)
Feed motor (M1)
6. Buffer Path Paper Sensor Stationary Jam (23H)
The sheet does not move past the buffer path paper sensor when an equivalent of twice the
feeding length of the sheet has been fed after the buffer path paper sensor turned on.
Jam check
Buffer inlet sensor
(PI3)
Buffer path paper
sensor (PI14)
Feed motor (M1)
COPYRIGHT © 1998 CANON INC. FINISHER-C1/SADDLE FINISHER-C2 REV. 0 DEC. 1998 PRINTED IN JAPAN (IMPRIME AU JAPON)
Equivalent
of size x 2
Normal
Figure 2-274
Equivalent
of 400 mm
Normal
Figure 2-275
Equivalent
of size x 2
Normal
Figure 2-276
CHAPTER 2 FINISHER UNIT BASIC OPERATION
Jam check
Buffer inlet sensor
(PI17)
Feed motor (M1)
Jam check
Buffer inlet sensor
(PI3)
Buffer path paper
sensor (PI14)
Feed motor (M1)
Jam check
Buffer inlet sensor
(PI3)
Buffer path paper
sensor (PI14)
Feed motor (M1)
Equivalent
of size x 2
Jam
Equivalent
of 400 mm
Jam
Equivalent
of size x 2
Jam
2-51