Canon FINISHER-C1 Service Manual page 40

CHAPTER 2 FINISHER UNIT BASIC OPERATION
1. Normal Delivery
a. Simple Stacking
The finisher delivers copies directly to the tray.
b. Job Offset
The finisher forwards the first or the last copy of a sort job to the stapling tray. The copy on the
stapling tray is delivered with a shift to the front of about 30 mm. Whether the first copy or the last
copy of a sort job should be shifted is determined by the host copier.
All other copies are delivered without being moved through the stapling tray.
1st Copy or Last Copy of Each Sort Job
2nd and Subsequent Copies or Copies Other Than the Last Copy of Each Sort Job
Tray
2-10
Tray
A
Copies
B
C
Figure 2-203
Swing guide
Stapling
tray
Delivery roller
Figure 2-204
2nd and subsequent copies
or copies other than last
copy of each sort job
1st copy or last copy of
each sort job
Figure 2-205
COPYRIGHT © 1998 CANON INC. FINISHER-C1/SADDLE FINISHER-C2 REV. 0 DEC. 1998 PRINTED IN JAPAN (IMPRIME AU JAPON)
Tray
A
Copies
B
C
Feed roller 2
Delivery roller
Stopper
Feed roller 1
Swing guide
Stapling
tray
Delivery roller
Feed roller 1
Feed roller 2
Stopper