®
ABB i-bus
KNX
3.2.15 Parameter window
X: Staircase light
© 2008 ABB STOTZ-KONTAKT GmbH
Commissioning
The parameter window X: Staircase light is enabled if in parameter window
the parameter Additional function is set with the option Staircase
X: General
light.
Note
The staircase light can not always be combined with a constant lighting
control.
For further information see:
Brightness value after switching on
Options:
100/99...1/0 % (OFF)
This parameter defines the brightness value of the lighting during the
staircase lighting time (0...100 %). If the brightness value is less than
the minimum dimming value, the minimum dimming value is set.
Time duration in sec [0...65,535]
Options:
0...180...65,535
This parameter determines the time duration for which the staircase lighting
is switched on with the staircase light brightness.
Communication objects
and
staircase light
80