A.3 Table For The Object Status Function - ABB i-bus KNX Product Manual

®
ABB i-bus KNX
A.3 Table for the object
Status function
© 2008 ABB STOTZ-KONTAKT GmbH
Appendix
Bit
7 6 5 4
No.
0 00
1 01
2 02
3 03
4 04
5 05
6 06
7 07
8 08
9 09
10 0A
11 0B
12 0C
13 0D
14 0E
15 0F
This code table applies for the object Status function (No. 3).
In the table = additional function runs; Light Controller controls,
staircase light runs, slave receives no brightness value.
The operating status refers to the state of the additional functions, i.e. is
the staircase lighting time running, is the light controller running or does
the slave receive a brightness value via the object Brightness value of slave.
Every bit defines the operating state of an output. The first bit belongs to
output A, the second bit to output B. For the four-fold Light Controller the
third and fourth bits define the states of outputs C and D:
Telegram values:
Note: The information regarding if the additional function is actually active
can be queried via the first bit of the status byte of the output, or directly via
the respective object Activate xy (xy = control, staircase light, slave mode).
3 2 1 0
0 = additional function latent, and is not undertaken
1 = additional function runs; Light Controller controls,
staircase light runs, slave receives no brightness
value
143