ABB i-bus KNX Product Manual page 26

®
ABB i-bus KNX
© 2008 ABB STOTZ-KONTAKT GmbH
Commissioning
Continued
Properties/Parameterisation possibilities
Switch function
Brightness value when turned on
Dimming speed for switch on and off
Dimming
Dimming speed can be changed via KNX
Minimum and maximum dimming values
Switch on/off via rel. dimming
Brightness value
Dimming speed for transition brightness values
Minimum and maximum brightness values
Set switch on and off via value
Brightness control
Control speed
Dimming value for lighting control
Lighting control can be switched off via the switch, dim brightness
command
Lighting control can be switched on via the switch command
Optional use of several Light Sensors per control circuit
Fluorescent strips can be controlled in different ways with
characteristic adjustment
Control circuit calibration via daylight and artificial lighting
calibration
Automatic recording of lighting characteristic for the
determination of optical control parameters
Target value can be changed via the bus
Slave mode in lighting control
Response with switch/dim/brightness/preset and
scene command can be parameterised
Brightness weighting between master and slave via
characteristic adjustment
Internal or external communication object master/slave connection
Reaction on bus voltage recovery
Presets (4 items)
Scenes (8 bit scene)
Assignment of the output in up to 18 scenes
Forced operation
2 bit coded forced operation
1 bit forced operation recall
Behaviour after bus voltage recovery
Blocking, block output via 1 bit object
LR/S LR/S
2.16.1 4.16.1
24