Select - ABB ACS150 User Manual

Parameters in the Long Parameter mode
Index Name/Selection
3408 SIGNAL2 PARAM
0, 102...162
3409 SIGNAL2 MIN
x...x
3410 SIGNAL2 MAX
x...x
3411 OUTPUT2 DSP
FORM
3412 OUTPUT2 UNIT
3413 OUTPUT2 MIN
x...x
3414 OUTPUT2 MAX
x...x
3415 SIGNAL3 PARAM
0, 102...162
3416 SIGNAL3 MIN
x...x
3417 SIGNAL3 MAX
x...x
3418 OUTPUT3 DSP
FORM
3419 OUTPUT3 UNIT
3420 OUTPUT3 MIN
x...x
Description
Selects the second signal to be displayed on the control panel in display
mode. See parameter 3401
Parameter index in group 01 OPERATING
If value is set to 0, no signal is selected.
If parameter 3401 SIGNAL1 PARAM,
SIGNAL3 PARAM values are all set to 0, n.A. is displayed.
Defines the minimum value for the signal selected by parameter
SIGNAL2 PARAM. See parameter
Setting range depends on parameter
Defines the maximum value for the signal selected by parameter
SIGNAL2 PARAM. See parameter
Setting range depends on parameter
Defines the format for the displayed signal selected by parameter
SIGNAL2 PARAM.
See parameter 3404 OUTPUT1 DSP FORM.
Selects the unit for the displayed signal selected by parameter
SIGNAL2 PARAM.
See parameter 3405 OUTPUT1 UNIT.
Sets the minimum display value for the signal selected by parameter
SIGNAL2 PARAM. See parameter
Setting range depends on parameter
Sets the maximum display value for the signal selected by parameter
SIGNAL2 PARAM. See parameter
Setting range depends on parameter
Selects the third signal to be displayed on the control panel in display mode.
See parameter 3401 SIGNAL1 PARAM.
Parameter index in group 01 OPERATING
If value is set to 0, no signal is selected.
If parameter 3401 SIGNAL1 PARAM,
SIGNAL3 PARAM values are all set to 0, n.A. is displayed.
Defines the minimum value for the signal selected by parameter 3415. See
parameter 3402 SIGNAL1 MIN.
Setting range depends on parameter
Defines the maximum value for the signal selected by parameter
SIGNAL3 PARAM. See parameter
Setting range depends on parameter
Defines the format for the displayed signal selected by parameter
SIGNAL3 PARAM.
See parameter 3404 OUTPUT1 DSP FORM.
Selects the unit for the displayed signal selected by parameter
SIGNAL3 PARAM.
See parameter 3405 OUTPUT1 UNIT.
Sets the minimum display value for the signal selected by parameter
SIGNAL3 PARAM. See parameter
Setting range depends on parameter
SIGNAL1 PARAM.
DATA. E.g. 102 =
3408 SIGNAL2 PARAM and
3402 SIGNAL1 MIN.
3408 setting.
3402 SIGNAL1 MIN.
3408 setting.
3402 SIGNAL1 MIN.
3408 setting.
3402 SIGNAL1 MIN.
3408 setting.
DATA. E.g. 102 =
3408 SIGNAL2 PARAM and
3415 SIGNAL 3 PARAM setting.
3402 SIGNAL1 MIN.
3415 SIGNAL3 PARAM setting.
3402 SIGNAL1 MIN.
3415 SIGNAL3 PARAM setting.
Def
104
0101 SPEED.
3415
3408 -
-
3408 -
-
3408 9 = DIRECT
-
3408 -
-
3408 -
-
3408 -
-
105
0101 SPEED.
3415
-
-
3415 -
-
3415 9 = DIRECT
-
3415 -
-
3415 -
-
Actual signals and parameters
101