About The Manual; What This Chapter Contains; Compatibility; Intended Audience - ABB ACS150 User Manual

About the manual

What this chapter contains

The chapter describes the intended audience and compatibility of this manual. It also
contains a flowchart of steps for checking the delivery and installing and
commissioning the drive. The flowchart refers to chapters/sections in this manual.

Compatibility

The manual is compatible with the ACS150 drive firmware version 1.30b or later.
See parameter

Intended audience

This manual is intended for persons who plan the installation, install, commission,
use and service the drive. Read the manual before working on the drive. The reader
is expected to know the fundamentals of electricity, wiring, electrical components
and electrical schematic symbols.
This manual is written for readers worldwide. Both SI and imperial units are shown.
Special US instructions for installations in the United States are given.

Categorization according to the frame size

The ACS150 is manufactured in frame sizes R0...R2. Some instructions, technical
data and dimensional drawings which only concern certain frame sizes are marked
with the symbol of the frame size (R0...R2). To identify the frame size of your drive,
see the rating table on page

Product and service inquiries

Address any inquiries about the product to your local ABB representative, quoting
the type code and serial number of the unit in question. A listing of ABB sales,
support and service contacts can be found by navigating to
selecting Drives – Sales, Support and Service network.

Product training

For information on ABB product training, navigate to
Drives – Training courses.

Providing feedback on ABB Drives manuals

Your comments on our manuals are welcome. Go to www.abb.com/drives, then
select successively Drives – Document Library – Manuals feedback form.
3301 FIRMWARE.
113 in chapter Technical data.
www.abb.com/drives
www.abb.com/drives
13
and
and select
About the manual