Ambient Conditions; Materials - ABB ACS150 User Manual

Ambient conditions

Installation site altitude
Air temperature
Relative humidity
Contamination levels
(IEC 60721-3-3,
IEC 60721-3-2,
IEC 60721-3-1)
Sinusoidal vibration
(IEC 60721-3-3)
Shock
(IEC 60068-2-27, ISTA 1A)
Free fall

Materials

Drive enclosure
Package
Disposal
Environmental limits for the drive are given below. The drive is to be used in a heated
indoor controlled environment.
Operation
installed for stationary use
0 to 2000 m (6600 ft) above
sea level
[above 1000 m (3300 ft), see
section Derating on page
114]
-10 to +50°C (14 to 122°F).
No frost allowed. See section
Derating on page 114.
0 to 95%
No condensation allowed. Maximum allowed relative humidity is 60% in the presence of
corrosive gases.
No conductive dust allowed.
According to IEC 60721-3-3,
chemical gases: Class 3C2
solid particles: Class 3S2.
The ACS150 must be
installed in clean air
according to enclosure
classification. Cooling air
must be clean, free from
corrosive materials and
electrically conductive dust.
Tested according to
IEC 60721-3-3, mechanical
conditions: Class 3M4
2...9 Hz, 3.0 mm (0.12 in.)
2
9...200 Hz, 10 m/s (33 ft/s
-
Not allowed
• PC/ABS 2 mm, PC+10%GF 2.5...3 mm and PA66+25%GF 1.5 mm, all in color
NCS 1502-Y (RAL 9002 / PMS 420 C)
• hot-dip zinc coated steel sheet 1.5 mm, thickness of coating 20 micrometers
• extruded aluminium AlSi.
Corrugated cardboard.
The drive contains raw materials that should be recycled to preserve energy and natural
resources. The package materials are environmentally compatible and recyclable. All
metal parts can be recycled. The plastic parts can either be recycled or burned under
controlled circumstances, according to local regulations. Most recyclable parts are marked
with recycling marks.
If recycling is not feasible, all parts excluding electrolytic capacitors and printed circuit
boards can be landfilled. The DC capacitors contain electrolyte, which is classified as
hazardous waste within the EU. They must be removed and handled according to local
regulations.
For further information on environmental aspects and more detailed recycling instructions,
please contact your local ABB distributor.
Storage
in the protective package
-
-40 to +70°C (-40 to +158°F) -40 to +70°C (-40 to +158°F)
Max. 95%
According to IEC 60721-3-1,
chemical gases: Class 1C2
solid particles: Class 1S2
-
2
)
According to ISTA 1A.
2
Max. 100 m/s (330 ft/s
11 ms.
76 cm (30 in.)
Transportation
in the protective package
-
Max. 95%
According to IEC 60721-3-2,
chemical gases: Class 2C2
solid particles: Class 2S2
-
According to ISTA 1A.
2 2
), Max. 100 m/s (330 ft/s
11 ms.
76 cm (30 in.)
Technical data
121
2
),