Expanding 1St Device Row - Siemens SIPROTEC 5 Series Hardware Description

Working on the Device
5.2 Expanding Modular Devices
[dwauizei-040211-01.tif, 1, --_--]
Figure 5-9
[dwabosop-040211-01.vsd, 2, en_US]
Figure 5-10
5.2.3.2

Expanding 1st Device Row

Preparation
NOTE
i
i
Reordered modules are not contained in the original device configuration. Use DIGSI to perform the corre-
sponding extension in the Hardware and Protocols Editor.
Carry out the steps described in this chapter if you wish to expand an installed device later on with expan-
sion modules.
Shut down the device.
²
Use a screwdriver to carefully bend the left and right spring clips outwards.
²
Completely detach the wired current and voltage terminal blocks from the device.
²
Remove all communication lines.
²
166
Device Row
Detached On-Site Operation Panel
SIPROTEC 5, Hardware Description, Manual
C53000-G5040-C002-C, Edition 10.2017