Eth-Bb-2Fo - Siemens SIPROTEC 5 Series Hardware Description

4.2.5.3

ETH-BB-2FO

Description
Product code
Figure
Connector type
Wavelength
Baud rate
Protocol
Max. line length
Transmit Power
50 μm/125 μm, NA
62.5 μm/125 μm, NA
Receiver sensitivity
Optical budget
Laser class 1 as per EN 60825-1/-2
Comment:
1 Numerical aperture (NA = sin θ (launch angle))
SIPROTEC 5, Hardware Description, Manual
C53000-G5040-C002-C, Edition 10.2017
Communication module for the transmission of Ethernet protocols via
2 optical interfaces
P1Zxxxxxxxxxx
2 x duplex LC
λ = 1300 nm
100 Mbit/s
DIGSI 5 protocol (secure Web service protocol)
IEC 61850 (MMS and GOOSE)
DNP3
Modbus TCP
IEC 60870-5-104
PROFINET IO
Synchrophasor protocol
You can switch other network services like SNMP, RSTP, PRP, HSR, SNTP,
and SUP Ethernet on and off.
2 km for 62.5 µm/125 µm optical fibers
Minimum
-23.5 dBm
1 = 0.2
-20.0 dBm
1 = 0.275
Maximum -12.0 dBm
Minimum -31.0 dBm
Minimum 7.5 dB for 50 μm/125 μm, NA
Minimum 11.0 dB for 62.5 μm/125 μm, NA
With the use of 62.5 μm/125 μm and 50 μm/125 μm optical fibers
4.2 Communication Modules
Typical Maximum
-20.0 dBm -14.0 dBm
-17.0 dBm -14.0 dBm
1 = 0.2
1 = 0.275
Plug-In Modules
149