Siemens SIPROTEC 5 Series Hardware Description page 164

Working on the Device
5.2 Expanding Modular Devices
NOTE
i
i
The distance between the 1st and the 2nd device row must be not more than 80 mm (3.15 in).
Install the 2nd device row.
²
Unscrew the captive screws from the handle mold.
²
Install the handle mold.
²
Install the screws for the handle mold from the view of the adaptor bracket. Thus, later accessibility is
²
ensured without having to remove the entire device.
[dw_2zeauf-020414-01, 1, --_--]
Figure 5-7
(1) Extreme right expansion module of the 1st device row
(2) Connecting cables
(3) 2nd device row
[dw_winauf-020414-01, 1, --_--]
Figure 5-8
(1) 2 fastening screws
(2) Adaptor angle
164
Expansion with 2nd Device Row (View of the Installation Level without Showing the On-Site
Operation Panel)
Sealing Plate and Adaptor Bracket for the Expansion Module of the 1st Device Row
SIPROTEC 5, Hardware Description, Manual
C53000-G5040-C002-C, Edition 10.2017