Network Test - Huawei 9000 VCT V100R011 Administrator's Manual

HUAWEI 9000 HD Video Terminal
Administrator Guide
Table 11-4 Loopback tests
Test
Local audio
loopback
Local video
loopback
Local digital
loopback
Remote audio
loopback
Remote video
loopback
Remote digital
loopback

Network Test

Table 11-5 Network test
Test
Network test
Before a test, ensure that the terminal is connected to an IP network properly, the indicator of
the LAN network interface turns green, and the IP parameters are set correctly.
l
l
Remote Control Test
Test keys on the remote control to check whether they function properly. If some of the keys
are checked, the Remote Control Test screen can be exited by pressing and holding the
the remote control.
After all keys have been tested, the Remote Control Test screen is exited automatically.
Issue 09 (2012-09-03)
Item to Be Tested/
Objective
Local audio module
Local video module
Local audio-visual
modules
l Remote audio module
l Network transmission
l Remote video module
l Network transmission
l Remote audio-visual
modules
l Network transmission
Item to Be Tested/
Objective
IP access
In IP address, enter an IP address. Ensure that the IP address entered and the IP address
of the terminal are in different network segments. Select Start. If the test is passed, it
indicates that the gateway settings and the IP address of the terminal are correct.
If the terminal exists in a private network, enter an IP address in a public network in IP
address, and then select Start. If the test is passed, it indicates that the gateway settings,
the NAT address, and the IP address of the terminal are correct.
Huawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd.
11 Maintenance and Troubleshooting
Signal Stream
Microphone → 1 → 2 → speaker
Camera → 3 → 4 → display
The terminal performs local audio and
video loopback tests simultaneously.
Microphone → 1 → 5 → 6 → 7 → 8 → 6
→ 5 → 2 → speaker
Camera → 3 → 5 → 6 → 9 → 10 → 6 →
5 → 4 → display
The terminal performs remote audio and
video loopback tests simultaneously.
Signal Stream
Terminal → LAN or public network
on
160