Using The Wizard - Huawei 9000 VCT V100R011 Administrator's Manual

HUAWEI 9000 HD Video Terminal
Administrator Guide
l
l
The terminal supports only one 3G data card at one time. If multiple 3G data cards are inserted,
the terminal uses only the first data card that is ready and does not use the others.
When you insert or remove a data card, the following icons appear on the upper right corner of
the screen:
l
l

2.3 Using the Wizard

The Wizard helps you set the basic, camera, network, and power button parameters of the
terminal quickly and conveniently.
Context
Normally, the network parameters and camera parameters are set by the administrator when the
system is installed. Thus, these parameters need not be set again during the use of the
videoconferencing system. If a user needs to change the parameters, the administrator can
recommend the Wizard to the user to quickly complete the parameter settings.
Procedure
Step 1 From the home screen, select Settings, enter the administrator password (if set), and then select
OK to display the Settings screen.
Step 2 Choose Installation > Wizard, and then configure the terminal according to sections
General
2.5.4 Setting SIP
Step 3 Set the power button operations.
l Select Shut Down to power off the terminal from the web interface or the user interface
l Select Sleep to enable the terminal to enter sleep mode from the web interface or user interface
----End
Issue 09 (2012-09-03)
If the data card is a designated Huawei data card, the terminal detects it automatically, and
a message appears on the screen indicating that a data card is available.
If the data card is not a designated Huawei data card, the terminal fails to detect it, and a
message appears on the screen indicating that no data card is available.
indicates that a data card is connected to the terminal.
indicates that a data card has been removed, or the network connection of the data
card is faulty.
Parameters, 3.2 Setting Camera
Parameters.
controlled by the remote control.
controlled by the remote control.
After you select Sleep, the touch panel regards the terminal as a codec used in a Huawei RP
series telepresence system.
Huawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd.
Parameters, 2.5.3 Setting H.323
2 Network
2.4 Setting
Parameters, and
23