Joining An Hd-Video Conference Over An Ims Network - Huawei 9000 VCT V100R011 Administrator's Manual

HUAWEI 9000 HD Video Terminal
Administrator Guide
l
Step 2 Press
Step 3 Obtain the access number of the authentication conference.
Step 4 Set Type and Rate. Select the highest rate supported by the local terminal for Rate to boost the
call success rate.
Step 5 Select Call.
If no password is set for the authentication conference, the terminal can join the conference
directly after a language is specified.
If a terminal requests chair control rights during an authentication conference, the password for
the authentication conference (that is, the conference password) is required.
----End
Follow-up Procedure
The terminal joins the conference after it passes the authentication using the videoconferencing
system.

5.7 Joining an HD-Video Conference over an IMS Network

The terminal can join an HD video conference over an IMS network.
Context
Borne by the standard IP protocol, IMS uses VoIP applications based on the standard SIP
applications of the 3GPP to provide fixed and mobile multimedia services for operators.
Integrating MCUs can enhance the functionality of the Huawei IMS HD videoconferencing
solution.
Procedure
Step 1 Register the terminal with the network where the IMS is located. For details, see section
Setting SIP
Step 2 Call the conference ID allocated by the IMS. For details, see
Conference.
Step 3 Enter the password as prompted.
----End
Result
After the IMS authenticates the password, the terminal can join an HD video conference over
an IMS network.
Issue 09 (2012-09-03)
From the local site: Check that the site has been registered with the GK.
on the remote control to display the Call screen.
Parameters.
NOTE
Terminal users can obtain the conference ID and password allocated by the IMS from emails, text messages,
notices, or other methods.
Huawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd.
5 Initiating a Conference
5.6 Joining an Authentication
2.5.4
95