GE 350 Communications Manual page 122

IEC61850 CONFIGURATOR
FASTPATH:
4-50
Export CID file: This menu option gets the CID file from the relay by TFTP and creates a
3 Series relay file with extension *.CID.
When creating a CID file using a 3rd party ICT/SCL tool, ensure the following guidlines are
followed:
– The order code in the CID file must match the device order code if writing the CID
file directly into the relay (without using the Enervista software).
– The maximum allowed services must be equal or below the specified limits as in
ICD/CID.
– Configure Datasets only in "LLN0" logical node.
– Creating new LD, LN, and communication-AP settings is not recommended.
OFFLINE SETTINGS FILE
The Export ICD file menu option generates a default ICD file with the respective order code
option and saves the file to the path the user has selected previously.
The Export CID File menu option generates the CID file, extracting all 61850 configuration
from the *.sr3 file.
CHAPTER 4: 3 SERIES IEC61850 GOOSE
SR3 SERIES PROTECTIVE RELAY PLATFORM – COMMUNICATIONS GUIDE