Types Of Files Generated By Enervista 650 Setup Software Operation Mode Off-Line - GE Multilin F650 Instruction Manual

4 HUMAN INTERFACES
NOTE 1: Depending on the type of Inputs/Outputs incorporated in relay slots F and G, configuration options will be different.
There are 2 template files available for working off-line with any F650 available model:
F650_F1G0_V200.650: Board 1 in slot F and without any board in slot G.
F650_F1G1_V200.650: Board 1 in slot F and board 1 in slot G.
F650_F1G4_V200.650: Board 1 in slot F and board 4 in slot G.
F650_F1G5_V200.650: Board 1 in slot F and board 5 in slot G.
F650_F2G0_V200.650: Board 2 in slot F and without any board in slot G.
F650_F2G1_V200.650: Board 2 in slot F and board 1 in slot G.
F650_F2G4_V200.650: Board 2 in slot F and board 4 in slot G.
F650_F2G5_V200.650: Board 2 in slot F and board 5 in slot G.
Table 4–1: TYPES OF FILES GENERATED BY ENERVISTA 650 SETUP SOFTWARE OPERATION MODE OFF-LINE:
FILE TYPE SETTINGS & CONFIGURATION FILE *.650
Relevant
Protection Settings and
sections inside
Configuration Section
the file
Created by EnerVista 650 Setup
Relay configuration file
containing all
protection elements
Definition and Settings, input/output
contents and LEDs
configuration, graphic
display configuration,
etc.
File storage in EnerVista 650 Setup:
the PC "File>Save *"
File Retrieval
of previously EnerVista 650 Setup:
stored files in "File>Open *"
PC
Connect with the relay
("Communications>Computer")
Basic
Open the created file ("File>Open *")
information
Send to relay from the menu: "File>Send info to relay"
transfer mode
Note that texts used in the configuration of inputs,
to the relay
outputs, etc. are not sent to the relay. The only texts
sent to relay are operations, events, and LEDs.
GE Multilin
4.1 ENERVISTA 650 SETUP SOFTWARE INTERFACE
LOGIC CONFIGURATION FILES (*.PEP, *AUT, *.LIB)
*.PEP
Compiled logic equations Header for
section Logic project
Logic
Logic configuration graphic configuration
editor (PLC Editor) graphic editor
(PLC Editor)
PLC project file
containing the
necessary
information
relative to the
Equations corresponding to
relay model,
the logic created and compiled
logic libraries
in the PLC Editor
included in the
project (*.lib),
graphic file
name (*.aut),
etc.
EnerVista 650 Setup:
"File>Save *"
PLC Editor:
It is necessary to store the
"File>Save
logic configuration files used to
Project"
create the PLC project for
further logic modifications.
EnerVista 650 Setup:
"File>Open *" PLC Editor:
It is necessary to have the "File>Open
logic configuration files used to Project"
create the PLC project
Connect with the relay ("Communications>Computer")
Launch F650 PLC Editor ("Setpoint>Logic Configuration")
Open the created PLC project ("File>Open Project")
Compile the project ("Run>Compile")
Now the logic (virtual outputs) can be sent directly to relay
("Run>Send Equations to Relay"). Texts of virtual outputs are
not stored in the relay, only in the logic configuration files to be
edited.
F650 Digital Bay Controller
*.AUT *.LIB
Graphical edition
container. Logic User programmable
equations in FDB logic objects
format.
Logic configuration Logic configuration
graphic editor (PLC graphic editor (PLC
Editor) Editor)
PLC Project file Library file to be
containing all the included as an object
drawings used by the in a PLC project.
logic, required by F650 Logic packages that
relay based on IEC can be stored into
61131-3 standard. libraries and be
Functional block distributed in different
diagram (FDB). PLC projects.
PLC Editor: PLC Editor:
"File>Save Project" "File>Save Library"
PLC Editor:
PLC Editor:
"File>Library>New
"File>Open Project"
Library"
4
4-9