Table of Contents
Advertisement
SECTION THREE - Interfacing
Parameter
Output format
NMEA 0183 baud rate
Page 54
differential corrections). If the 961 already has an internal differential
receiver, you can use the aux port to transmit its differential corrections
to another device that accepts them.
To access the aux port options:
1. Press the STAR key to access the SERVICE MENU screen.
2. Press the PORT SETUP key, then press the AUX PORT key. The 961
displays the AUXILIARY PORT SETUP screen with configurable
options for format and baud rate.
Figure 27: Auxiliary port setup screen
The following configuration parameters are available, as outlined in Table
8, detailed in the text that directly follows:
output format
•
NMEA 0183 baud rate
•
Table 8: Aux port setup parameters
Options
Choose
(
port 2
Choose
19200
To change the aux port settings:
1. Press the CURSOR PAD down to highlight either FORMAT or BAUD,
then press the EDIT key.
2. Press the CURSOR PAD left or right to highlight the desired setting,
then press the ACCEPT key (or press CANCEL to leave the option
unchanged).
104-O (
)
104-I (
out
,
in),
)
P3 (
)
DIAG (
,
port 3
, or
diagnostic
300
1200
2400
4800
,
,
,
961 INSTALLATION MANUAL Revision A
P1 (
)
P2
port 1
,
)
9600
,
, or
Advertisement
Table of Contents
Troubleshooting
