Configuring The Nmea Output Ports; Table 5: Interface Cable Wiring - NorthStar GM1708 961X Installation Manual

SECTION THREE - Interfacing

Configuring the NMEA output ports

Page 46

Table 5: Interface cable wiring

Plug 1
Pin Function
1 Alarm Out
2 Alarm Out
3 Reserved
4 Reserved
5 Gnd
6 PPNM Out
7 Reserved
8 Reserved
9 Port 3 In (A)
10 Port 3 In (B)
11 Gnd
12 Port 3 Out (A)
13 Port 3 Out (B)
14 Port 1 In (A)
15 Port 1 In (B)
16 Gnd
17 Port 1 Out (A)
18 Port 1 Out (B)
Each output port can be programmed to meet most any special require-
ments of devices that conform to the NMEA 0183—and other—data for-
mat specifications. The service function described below allows the
selection of the specific 0183 sentences that will be transmitted by the
961.
1. Press the STAR key until you see the SERVICE MENU screen.
2. Press the PORT SETUP key to display the PORT SETUP OPTION
screen.
3. Press the PORT 1, PORT 2, or PORT 3 key. A list of configurable port
options (identical for all three ports) is displayed, as shown below.
Plug 2
Pin Function
1 Reserved
2 Reserved
3 Reserved
4 Reserved
5 Gnd
6 MOB In
7 Gnd
8 SAVE In
9 Aux Port In (B)
10 Aux Port In (A)
11 Gnd
12 Aux Port Out (B)
13 Aux Port Out (A)
14 Port 2 In (A)
15 Port 2 In (B)
16 Gnd
17 Port 2 Out (A)
18 Port 2 Out (B)
961 INSTALLATION MANUAL Revision A