Maintenance Functions; Figure 36: Save Log Data Dialog Box - NorthStar GM1708 961X Installation Manual

SECTION FOUR - Service/Maintenance

Maintenance functions

Cleaning the 961
Installing 961
software updates
Page 68

Figure 36: Save log data dialog box

3. Insert the disk into the drive (either a floppy disk or a Zip disk), then
press the CONFIRM key. The SAVING LOG DATA dialog box appears,
asking you to wait while the 961 saves the log data. This dialog box
is followed by the SUMMARY OF LOG DATA dialog box, showing the
number of log files saved.
4. Press the CONFIRM key to return to the DATABASE FUNCTION
screen.
To clean the glass lens of the control head, use a commercially available
glass cleaner. Periodically, dust the processor, especially around its floppy
or Zip drive, and the CD-ROM drive.
Periodically, you'll receive a notice from Northstar about the release of a
new version of 961 software. When you receive this notice, call the
Northstar Service Department to request the current software update on
CD-ROM (installation instructions are provided with the CD). To ensure
that you receive the correct CD-ROM, however, be sure to give the North-
star service technician your current software version. To access this infor-
mation about your unit, press the STAR key to display the SERVICE
MENU screen, then press the PRODUCT INFORMATION key; the software
version number is located in the PROCESSOR SN/REV field.
961 INSTALLATION MANUAL Revision A