General Information; Operator's Manual; Castor Wheel Tire Pressure; Blade Stopping Time - Toro Groundsmaster 4100-D Service Manual

General Information

CAUTION
Never install or work on the cutting deck or lift
arms with the engine running. Always stop en-
gine and remove ignition key first.

Operator's Manual

The Operator's Manual provides information regarding
the operation, general maintenance, adjustments and
maintenance intervals for your Groundsmaster cutting
deck. Refer to that publication for additional information
when servicing the machine.

Castor Wheel Tire Pressure

Castor tires on the cutting deck should be inflated to 50
PSI (345 kPa).

Blade Stopping Time

The blades of the cutting deck should come to a com-
plete stop in approximately five (5) seconds after the
PTO switch is pushed in (disengaged).
NOTE: Make sure the deck is lowered onto a clean sec-
tion of turf or hard surface to avoid dust and debris.
Groundsmaster 4100--D/4110--D
To verify blade stopping stopping time, have a second
person stand back from the deck at least twenty (20) feet
and watch one of the cutting deck blades. Have the op-
erator push the PTO switch in to disengage the cutting
deck and record the time it takes for the blades to come
to a complete stop. If this stopping time is excessive, the
braking valve(s) (RV2) on the hydraulic deck control
manifold(s) may need adjustment.
Page 8 - - 3 Cutting Deck