Planetary Wheel Drive Assembly - Toro Groundsmaster 4100-D Service Manual

Planetary Wheel Drive Assembly

85 to 100 ft- -lb
(115 to 135 N- -m)
14
2
1
3
11
4
5
RIGHT
FRONT
1. Planetary assembly
2. Retaining ring
3. Splined brake coupler
4. Brake assembly (RH)
5. O- -ring
NOTE: The planetary wheel drive assembly can be ser-
viced with the planetary installed to machine (see Plane-
tary Wheel Drive Service in this section). Use the
following procedure to remove and install planetary
wheel drive assembly from machine.
Axles, Planetaries and Brakes
13
6
7
8
75 to 85 ft- -lb
(101 to 115 N- -m)
6. Hydraulic wheel motor
7. Flat washer
8. Cap screw (2 used per side)
9. Flange head screw (4 used per side)
10. Brake assembly (LH)
5
6
9
10
11
2
Figure 7
Page 6 - - 10
12
(101 to 115 N- -m)
3
1
11. Gasket
12. Flange head screw (6 used per side)
13. Tire and wheel assembly
14. Lug nut (8 used per wheel)
Groundsmaster 4100--D/4110--D
75 to 85 ft- -lb