General Information - Toro Groundsmaster 4100-D Service Manual

General Information

This Chapter gives information about specifications and
repair of the diesel engine used in the Groundsmaster
4100--D and 4110--D.
General maintenance procedures are described in your
Operator's Manual. Information on engine troubleshoot-
ing, testing, disassembly and reassembly is identified in
the Kubota Workshop Manual, Diesel Engine, 03--M--
E3B Series that is included at the end of this section.
Most repairs and adjustments require tools which are
commonly available in many service shops. Special
Operator's Manual
The Operator's Manual provides information regarding
the operation, general maintenance and maintenance
intervals for your Groundsmaster machine. Refer to that
publication for additional information when servicing the
machine.
Stopping the Engine
IMPORTANT: Before stopping the engine after
mowing or full load operation, cool the turbo-char-
ger by allowing the engine to run at low idle speed
for five (5) minutes. Failure to do so may lead to tur-
bo-charger trouble.
Groundsmaster 4100--D/4110--D
tools are described in the Kubota Workshop Manual,
Diesel Engine, 03--M--E3B Series. The use of some
specialized test equipment is explained. However, the
cost of the test equipment and the specialized nature of
some repairs may dictate that the work be done at an en-
gine repair facility.
Service and repair parts for Kubota engines are sup-
plied through your Authorized Toro Distributor. If no
parts list is available, be prepared to provide your distrib-
utor with the Toro model and serial number of your ma-
chine.
Page 3 - - 3 Kubota Diesel Engine