Toshiba e-STUDIO200L Service Manual page 332

[I] Middle transport roller
(1) Take off the ADU drive unit
( P.15-13 "[G] ADU motor / ADU drive
unit").
(2) Remove 2 clips, 2 pulleys and 2 pins on the
front side. Then take off the timing belt.
(3) Remove 1 E-ring and 1 clip on the rear side.
(4) Take off 2 bushings and middle transport
roller.
e-STUDIO200L/202L/203L/230/232/233/280/282/283
AUTOMATIC DUPLEXING UNIT (ADU) (OPTION: MD-0102)
ADU drive unit
Timing belt
Middle transport roller
E-ring
Clip Bushing
© 2004 - 2008 TOSHIBA TEC CORPORATION All rights reserved
15 - 16
Fig. 15-27
Pin
Pin
Pulley
Clip
Fig. 15-28
Bushing
Fig. 15-29