Toshiba e-STUDIO200L Service Manual page 225

(3) Remove 1 screw and take off the paper size
detection sensor.
[J] 2nd transport sensor / Bypass pickup solenoid
(1) Take off the bypass unit
( P.9-17 "[G] Bypass unit").
(2) Take off the bypass tray
( P.9-18 "[H] Bypass tray").
(3) Take off the bypass feed unit
( P.9-13 "[B] Bypass feed unit").
(4) Remove 1 screw and take off the bypass
separation roller cover
( P.9-14 "[C] Bypass separation roller").
(5) Remove 2 screws and take off the 2nd trans-
port sensor cover.
(6) Remove 3 screws and take off the bypass
unit lower cover.
© 2004 - 2008 TOSHIBA TEC CORPORATION All rights reserved
Fig. 9-25
2nd transport sensor cover
Fig. 9-26
Bypass unit lower cover
Fig. 9-27
e-STUDIO200L/202L/203L/230/232/233/280/282/283
9 - 19
Paper size
detection sensor
PAPER FEEDING SYSTEM
9