(8)
Remove 3 screws and take off the fixing
bracket.
(9)
Remove 2 screws and disconnect 1 connec-
tor. Release the harness from 1 harness
clamp and then take off the bracket fixing the
lower transport clutch and 1 bushing.
(10) Take off the lower transport clutch and 1
bushing.
© 2004 - 2008 TOSHIBA TEC CORPORATION All rights reserved
Fixing bracket
Fig. 9-54
Harness clamp
Fixing bracket
Fig. 9-55
Lower transport clutch
Bushing
Fig. 9-56
e-STUDIO200L/202L/203L/230/232/233/280/282/283
9 - 29
Connector
Bushing
PAPER FEEDING SYSTEM
9