Toshiba e-STUDIO200L Service Manual page 228

[N] Paper stock sensor
(1) Take off the drawer feeding unit
( P.9-20 "[K] Drawer feeding unit").
(2) Pull up the paper stock sensor arm.
(3) Disconnect the connector and release the
latches to take off the paper stock sensor.
[O] Separation roller
(1) Take off the drawer feeding unit
( P.9-20 "[K] Drawer feeding unit").
(2) Remove 1 screw and take off the separation
roller holder.
(3) Detach the lever from the holder and take off
the separation roller with the shaft.
e-STUDIO200L/202L/203L/230/232/233/280/282/283
PAPER FEEDING SYSTEM
Paper stock sensor
Separation roller holder
Separation roller
© 2004 - 2008 TOSHIBA TEC CORPORATION All rights reserved
9 - 22
Paper stock sensor arm
Fig. 9-33
Fig. 9-34
Lever
Fig. 9-35