Toshiba e-STUDIO200L Service Manual page 261

(3) Release the harness from the harness clamp
and pull out the discharge LED.
[D] Main charger
(1) Take off the discharge LED unit
( P.11-10 "[C] Discharge LED").
(2) Pull out the main charger and take it off by
sliding it to the rear side.
Note:
Be careful not to touch or scratch the drum
surface at this time.
[E] Main charger grid
(1) Take off the main charger
( P.11-11 "[D] Main charger").
(2) Remove the spring and take off the main
charger grid.
Note:
Do not touch the mesh area of the grid.
© 2004 - 2008 TOSHIBA TEC CORPORATION All rights reserved
Fig. 11-12
Fig. 11-13
Main charger grid
Fig. 11-14
e-STUDIO200L/202L/203L/230/232/233/280/282/283
11 - 11
Discharge LED
Main charger
Spring
DRUM RELATED SECTION
11