Toshiba e-STUDIO200L Service Manual page 240

(18) Slide the registration roller (metal) to the rear
side. Then remove the gear.
(19) Pull out the registration roller (metal) to the
front side.
[X] Registration sensor
(1) Take off the registration rollers (rubber one
and metal one)
( P.9-31 "[W] Registration roller").
(2) Disconnect 1 connector and remove 3
screws and take off the registration guide L.
e-STUDIO200L/202L/203L/230/232/233/280/282/283
PAPER FEEDING SYSTEM
Registration roller ( metal )
© 2004 - 2008 TOSHIBA TEC CORPORATION All rights reserved
9 - 34
Gear
Registration roller
( metal )
Fig. 9-68
Fig. 9-69
Registration guide L
Fig. 9-70