Toshiba e-STUDIO200L Service Manual page 222

(4) Remove 1 clip and take off the bypass feed
roller unit from the shaft. Then take off the
bypass feed roller.
[E] Bypass paper sensor
(1) Take off the bypass feed unit
( P.9-13 "[B] Bypass feed unit").
(2) Remove 2 screws and take off the upper
guide.
(3) Release the latches and take off the bypass
paper sensor.
e-STUDIO200L/202L/203L/230/232/233/280/282/283
PAPER FEEDING SYSTEM
Bypass feed roller
Bypass feed roller unit
Clip
© 2004 - 2008 TOSHIBA TEC CORPORATION All rights reserved
9 - 16
Fig. 9-17
Upper guide
Fig. 9-18
Bypass paper sensor
Fig. 9-19