Toshiba e-STUDIO200L Service Manual page 314
Multifunctional digital systems
Hide thumbs
Also See for e-STUDIO200L:
- Service handbook (762 pages) ,
- Service manual (708 pages) ,
- Operator's manual (102 pages)
Table of Contents
Advertisement
[C] Paper exit drive unit
(1)
Take off the paper exit unit
(
P.14-5 "[B] Paper exit unit").
(2)
Release the harness from 2 harness clamps.
(3)
Remove 3 screws and take off the paper exit
drive unit.
(4)
Remove 3 gears and take off the timing belt.
And then slide the exit motor to the hole and
take it off.
[D] Exit sensor
(1)
Take off the paper exit unit
(
P.14-5 "[B] Paper exit unit").
(2)
Disconnect 1 connector and take off the exit
sensor.
e-STUDIO200L/202L/203L/230/232/233/280/282/283
PAPER EXIT SECTION
Drive unit
Harness
clamp
Gear
Timing belt
Gear
© 2004 - 2008 TOSHIBA TEC CORPORATION All rights reserved
14 - 6
Harness
clamp
Fig. 14-6
Gear
Exit motor
Fig. 14-7
Exit sensor
Fig. 14-8
Hide quick links:
Advertisement
Table of Contents
