Toshiba e-STUDIO200L Service Manual page 282

[E] Auto-toner sensor
(1) Remove the developer material
( P.12-10 "[C] Removing developer mate-
rial").
(2) Place the developer unit upside down. Dis-
connect 1 connector, remove 1 screw, and
then take off the auto-toner sensor.
[F] Drum thermistor
(1) Remove the developer material
( P.12-10 "[C] Removing developer mate-
rial").
(2) Disconnect 1 connector, remove 1 screw and
take off the drum thermistor.
e-STUDIO200L/202L/203L/230/232/233/280/282/283
DEVELOPMENT SYSTEM
Connector
© 2004 - 2008 TOSHIBA TEC CORPORATION All rights reserved
12 - 12
Auto-toner sensor
Fig. 12-14
Drum thermistor
Connector
Fig. 12-15